Use CAT5e cable to extend connections to USB peripherals such as keyboards, mice, interactive whiteboards, and other devices without the need for external power adapters.
The extender’s transmitter receives power from the host computer, making it ideal for extensions in industrial control, sensor, or data acquisition applications where you are short on power outlets. The extender supplies up to 400 mA to USB devices and is industrial rated for ESD/EFT (electrostatic discharge/electrically fast transient) immunity.
Also, the extender’s receiver has two downstream USB Type A ports for plugging in USB 1.1 or 2.0 devices (USB 2.0 up to 12 Mbps). The extender supports 40 meters (130-foot ) extensions over non-networked CAT5e cabling, but for some low-speed HID devices (keyboards and mice, for instance), it can go as far as 85 meters (278 feet).
What’s more, it’s easy to set up with no need to add any software to your system or target devices. Simply attach the transmitter to your computer’s USB port, plug in the CAT5e cable, attach the remote USB peripheral to the receiver, and begin transmitting.
Distance (Maximum) —
Full-Speed and Low-Speed: 40 m (130 ft.);
Low-Speed: 85 m (278 ft.)
NOTE: Device and host dependent.
USB Device Support —
High-Speed devices (USB 2.0) at Full-Speed (USB 1.1) rates;
Full-Speed devices (USB 2.0 and USB 1.1);
Low-Speed devices (USB 2.0 and USB 1.1)
Connectors —
Transmitter: (1) USB Type B F; (1) RJ-45 (CAT5e interconnect);
Receiver: (2) USB Type A F, (1) RJ-45 (CAT5e interconnect)
Power — Transmitter: From the host device’s USB interface;
Receiver: From the transmitter;
Available power: 400 mA shared between USB ports when transmitter is supplied with 800 mA of bus power
Size — Each unit: 2.3 x 5.6 x 8.4 cm (0.9"H x 2.2"W x 3.3"D)
Winkelwagen
Inloggen
Neem contact op
