Foto kan afwijken van werkelijk product
|
|
|
|
|
|
Accessoires
Plug-and-play sensor integration
The AlertWerks with 20 Dry-Contact Inputs enables you to integrate multiple types of environmental sensors into one seamless remote monitoring system that watches over your premises. Each supports up to eight AlertWerks Intelligent Sensors. Sensors automatically configure and go on-line, ready to report any status change. Choose from a wide variety of sensors, including water, airflow, motion, and voltage. Additionally, the V4EL has 20 or 60 integral dry-contact inputs so you can also use third-party sensors.
Easy-to-use Web interface.
The ServSersor hub gathers and displays sensor data in an easy-to-use, Web-based user interface, automatically generating day, week, month, and year graphs for each sensor. The data can be downloaded for external processing or remotely polled and saved automatically to a PC.
Notification Wizard.
The Notification Wizard enables the hub to notify you of changes in sensor status in real time. Configure each notification by choosing a sensor, selecting the alarm condition, and defining what to do when the alarm is triggered. You can choose to be notified in a variety of ways: audible alarm, SNMP trap, e-mail, text message to your phone, or fax.
For instance, you can have the system e-mail you if the temperature in your data center exceeds your climate control value by 5° and send you a text message if the temperature continues to climb and goes over 30°.
You control the number of events.
To prevent false alarms, AlertWerks allows extensive filtering of events. You can limit events based on the time of day or the day of the week. You can also limit the number of alerts per hour, so that you are not swamped with messages. This is especially important with a sensor like the motion detector where you may want to process an event only after hours.
Auto shutdown.
You can have Linux® devices automatically send a shutdown message to your Linux or Windows® based servers—so if there is a power outage, for example, you can rest assured that your servers will be safely and automatically shut down before your UPS runs out.
Audio — Sampling Rate: 8 kHz
Configuration — Via Web browser (HTTP / HTTPS)
Encryption — SSL 128 bit (HTTPS), SNMPv3
Memory — 64 MB SDRAM, 128 MB NVRAM
Operating System — Embedded Linux®
Processor — 32-bit Xscale PXA270, 312 MHz
Protocols Supported (Client) — DHCP, DNS, SMTP, (S) NTP, SNMP
Connectors — All:
(8) RJ-45 sensor, (3) 3.5-mm audio jacks, (1) USB Type A, (1) RJ-45 10/100M Ethernet, (1) DB9 M RS-232/V.24 console port, (1) 2-pin RS-485, (4) RJ-45 expansion ports;
(60) 2-pin dry contacts (20) 2-pin dry contacts;
Indicators — (1) Power, (1) Link, (1) Activity, (8) Status, (8) Online, (20) Status, (20) Online,
Power — Autosensing 100–240 VAC, 50–60 Hz external power supply;
Size — 4.6H x 45.2W x 13.8D cm (1.8"H x 17.08"W x 5.43"D);
Weight — 2.6 kg
Environmental —
Temperature: -35 to +55º C (-31 to +131º F);
Humidity: 20 to 80%, noncondensing;
Altitude: 0 to 3000 m (0 to 9842 ft.)
FIRMWARE DOWNLOAD: https://az849230.vo.msecnd.net/resources/SEC5ES405s-190405_25992.zip
Handleidingen
user guide
rev3
Jan 18, 2018
|