Line-Powered Extender Kit - HDMI over CATx

Compliance –
cUL: 1
FCC
UL: 1
Approvals — CE, FCC, RoHS2
Audio — The system delivers eight channels of HDMI audio with sample sizes of 16, 20, or 24 bit at 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, or 192kHz
Connectors —
Transmitter: HDMI type A male. USB type A (for power only);
Receiver: HDMI type A male.
Distance and resolution — 50 m at 1920 x 1200
Hardware Compatibility — All computers with HDMI connections
HDMI interface — The system supports resolutions such as 480p, 720p, 1080p, or WUXGA (1920x1200) at 60Hz* and 24 bit color depth. *with reduced blanking
Operating Temperature — 0 to 40°C (32 to 104°F)
Power — USB powered, 5VDC -2.5W for both RX and TX units combined
Dimensions —
2H x 6.4D x 4.6W cm (0.8"H x 2.5"D x 1.8"W)
Pigtails: 30 cm L (12")
Weight — 0.27 kg per pair

NOTES: Category 6 (or better) shielded twisted pair cable must be used to connect the local and remote units in order to maintain compliance with radio frequency energy emission regulations and ensure a suitably high level if immunity to electromagnetic disturbances.

Distances are achieved using simple lengths of trunk/bulk cable. For each break/patch connection reduce distance by 5 m. Preferably patch cables should be of type CAT7 and less than 2 m. Patch cables over 2 m must be CAT7.

Do not connect a local unit via the CATx cable, to anything other than the remote unit.

• (1) HDMI Transmitter
• (1) HDMI Receiver
• (1) User Guide