Audio Embedder/De-embedder - HDMI 2.0

The Audio Embedder/De-embedder allows the separation of high quality stereo analog audio and digital S/PDIF (Toslink) audio from the incoming HDMI signal without losing any active audio channels from the audio bit-stream. That makes HDMI audio more friendly to your audio systems with only stereo sound support, such as TV and stereo speakers. Or use it to embed external stereo analog audio or digital S/PDIF (Toslink) audio to the outgoing HDMI signal.
The Audio Embedder/De-embedder is also designed to support HDMI matrix switches. Combine it with your switching system and enable HDMI devices with different audio capacities to operate with multi-channel HDMI embedded audio at the same time.

Approvals – CE, FCC, RoHS2, WEEE, UL
Audio Support –
Supports HDMI, 3.5-mm analog audio, TOSLINK optical audio inputs and outputs;
Embeds audio from either 3.5-mm or optical source to an HDMI or DVI-D signal
Connectors –
Input: (1) screw lock barrel power connector, (1) USB mini for power and firmware upgrades, (1) HDMI, (1) 3.5-mm analog audio, (1) digital optical audio;
Output: (1) HDMI, (1) 3.5-mm analog audio, (1) TOSlinkdigital optical audio
CECC Channel – Bypass
Environmental –
Operating Temperature: 0 to 40° C (32 to 104° F);
Storage Temperature: -20 to 60° C (-4 to 104° F);
Humidity: 20 to 90%, non-condensing;
Altitude: 3125 m, maximum
Material – Enclosure: Metal
ESD Protection –
Human body model: ±19 kV (air-gap discharge) and 12 kV (contact discharge);
Core chipset: ±2 kV
PCB Stackup – 4-layer board (impedance control—differential 100 ohms, single 50 ohms)
Power –
Wallwart style;
Input: 100-240 VAC, 50/60 Hz, 0.58 Amp;
Output: 5-VDC, 4-Amp locking barrel plug
Resolution – 4K at 60 Hz 4:4:4
User Controls – (1) 2-position DIP switch, (1) 4-position DIP switch
Video Bandwidth – Single-link 594 MHz (18 Gbps)
Video Support – Up to 4K @ 60 Hz in 4:4:4 color
Dimensions – 2.61H x 9.49W x 6.62D cm (1.03"H x 3.74"W x 2.61"D)
Weight – 0.26 kg (0.57 lb.)

NOTE: When de-embedding audio without using an HDMI output, the unit must be powered up without the HDMI out connected. If you power the unit with HDMI connected and the disconnect it, audio will drop.

(1) Audio embedder/de-embedder
(1) 5-Volt, 4-Amp power supply with adapter clips
(2) Mounting screws
User Manual